cyberpower powerpanel personal edition hibernation mode

Cyberpower powerpanel personal edition hibernation mode install#
Cyberpower powerpanel personal edition hibernation mode manual#
Cyberpower powerpanel personal edition hibernation mode skin#

For optimal system performance keep the load below 80% of the unit’s rated capacity.

There are many factors that can affect the amount of power that your electronic equipment will require.

If the rated capacities of the unit are exceeded, an overload condition may occur and cause the UPS unit to shut down or the circuit breaker to trip.

Ensure that the equipment plugged into the UPS does not exceed the UPS unit’s rated capacity (450VA/260W for EC450G, 550VA/330W for EC550G, 750VA/450W for EC750G, 650VA/390W for EC650LCD, and 850VA/510W for EC850LCD).

Condensation from the aquarium can cause the unit to short out.

DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire or electric shock, do not use with or near an aquarium.

DO NOT use in any circumstance that would affect operation and safety of life support equipment, any medical applications or patient care.

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower Systems does not sell products for life support or medical applications.

Cyberpower powerpanel personal edition hibernation mode skin#

Released electrolyte is harmful to the skin and eyes. CAUTION! Do not open or mutilate batteries.CAUTION! Do not dispose of batteries in a fire.Dispose of used batteries according to the instructions. Batteries shall be installed by service personnel, and the replacement of batteries with a suitable recommended type. CAUTION! Risk of explosion if battery is replaced by an incorrect type.CAUTION! To reduce the risk of fire, connect only to a circuit provided with 20 amperes maximum branch circuit over current protection in accordance with the National Electric Code, ANSI/NFPA 70.CAUTION! Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.CAUTION! To avoid electric shock, turn off the unit and unplug it from the AC power source before installing a computer component.

If you need to de-energize this equipment, turn off and unplug the unit. Do not plug into an outlet that is not grounded.

CAUTION! The UPS must be connected to an AC power outlet with fuse or circuit breaker protection.

CAUTION! Hazardous live parts inside can be energized by the battery even when the AC input power is disconnected.

There are no user serviceable parts inside.

CAUTION! To reduce the risk of electric shock, do not remove the cover.

(Please see specifications for acceptable temperature and humidity range).

Cyberpower powerpanel personal edition hibernation mode install#

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area free of conductive contaminants.

Cyberpower powerpanel personal edition hibernation mode manual#

Read this manual thoroughly before attempting to unpack, install, or operate your UPS. Please read and follow all instructions carefully during installation and operation of the unit. This manual contains important safety instructions.